Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterAir Duct Cleaning in Aurora, IL
HVAC cleaning in Aurora typically runs $350-$650 for a full system, with air quality and sanitizing treatments adding $200-$450 depending on whether mold, bacteria, or odor issues are present. Aurora’s position in the Fox River Valley creates conditions we don’t see in neighboring markets: elevated humidity cycling through original 1950s-60s ductwork in East Aurora bungalows, and 1970s-80s flex-duct systems aging into collapse across newer subdivisions. We dispatch crews from our Chicago office to serve Aurora locally, and every job starts with a written price before any panel comes off. Call (331) 236-5490 for a free estimate.
Why Aurora Homes Are Different
Aurora contains an unusually wide span of housing vintages for a single Illinois market, from pre-1900 downtown structures to mid-century East Aurora bungalows with original forced-air ductwork that has often never been professionally cleaned. The city’s location in the Fox River Valley produces higher localized humidity than prairie communities to the west, accelerating moisture intrusion and biological growth inside older, uninsulated sheet-metal systems.
Technicians working East Aurora’s bungalow blocks regularly find that 1940s gravity “octopus” furnaces were converted to forced-air in the 1950s-60s with the original large-diameter gravity ducts left in place. These oddly oversized trunk lines contain dead-end runs and ledge-like horizontal offsets that accumulate 60-plus years of debris. The 1970s-80s tract construction across West Aurora presents the opposite problem: flex-duct branch runs now aging into collapse and disconnection, creating debris traps invisible to homeowners until we camera the system.
Spring pollen and fall mold-spore surges in this river-corridor environment push seasonal call volume sharply, particularly where older duct systems have no filtration upgrades.
Our Main Aurora Services
These are the three services Aurora homeowners call about most. Each has its own dedicated Aurora page with deeper detail on local conditions and pricing.
Air Duct Cleaning in Aurora
Full-system duct cleaning for Aurora’s mixed housing stock, from downtown Victorians with converted gravity systems to 1980s subdivisions with aging flex-duct. We photograph every run before and after, and the written price is set before work begins. Air Duct Cleaning in Aurora covers complete pricing and what we find in local homes.
Dryer Vent Cleaning in Aurora
Dryer vent blockages are common in Aurora’s older two-flats and bungalow blocks where original vent routing creates long horizontal runs with multiple elbows. We clear the full run and verify airflow at termination. Dryer Vent Cleaning in Aurora has local pricing and safety specifics.
Duct Repair & Sealing in Aurora
Disconnected flex-duct, corroded galvanized trunk lines, and failed sealing at plenum connections are standard finds in Aurora’s 1960s-1980s housing. Repair scope is photographed and priced in writing before any metalwork begins. Duct Repair & Sealing in Aurora details our process.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterHVAC Cleaning in Aurora
Aurora’s forced-air systems run hard: five to six months of continuous winter heating, summer humidity loading the evaporator coil, and spring pollen clogging blower assemblies in homes where the original filter slot was never upgraded past one-inch fiberglass. We clean the full mechanical system, not just the ducts, because a spotless duct run connected to a fouled coil simply recontaminates itself. Our HVAC Cleaning hub explains equipment and methods; this section covers what Aurora’s climate and housing stock demand specifically.
Evaporator Coil Cleaning
Signs you need it
Ice buildup on refrigerant lines, weak airflow from registers, or musty odor when the AC first cycles on in spring.
What it costs in Aurora
Evaporator coil cleaning in Aurora typically runs $180-$320 for accessible A-coils, with cased or downflow configurations adding $40-$80.
How we do it
We remove the access panel, apply foaming cleaner formulated for aluminum fins, rinse with low-pressure water capture, and photograph the coil before and after.
Blower Cleaning
Signs you need it
Dust puffing from registers at startup, uneven heating across rooms, or blower motor running louder than previous seasons.
What it costs in Aurora
Blower assembly cleaning in Aurora ranges $150-$280 for standard direct-drive units, with variable-speed ECM blowers at the higher end due to disassembly complexity.
How we do it
We remove the blower wheel and housing, clean each vane with compressed air and solvent, vacuum the squirrel cage, and balance the reinstalled assembly.
What HVAC Cleaning Costs in Aurora
| Item | Typical range in Aurora |
|---|---|
| Evaporator coil cleaning | $180-$320 |
| Blower assembly cleaning | $150-$280 |
| Full HVAC cleaning (coil + blower + air handler) | $350-$650 |
How do I know if my HVAC needs cleaning or just the ducts?
If you smell musty or burnt odor when the system cycles, or airflow drops seasonally while ducts are clean, the mechanical components need attention. Call (331) 236-5490 and we’ll inspect both.
Can you clean HVAC components in older Aurora homes with tight mechanical rooms?
Yes, we regularly work in East Aurora bungalows with converted basement furnaces where clearance is minimal; we disassemble and clean components outside the mechanical room when needed.
Air Quality & Sanitizing in Aurora
Aurora’s Fox River Valley humidity creates conditions for mold colonization inside ductwork that drier prairie communities rarely see, particularly in pre-1970 homes with uninsulated sheet-metal runs and no vapor barrier. Spring pollen loads and fall leaf-mold spores compound the issue in neighborhoods with mature canopy cover. We treat the biological load and install prevention, not just mask odor. Our Air Quality & Sanitizing hub covers methods; below is what Aurora homes specifically need.
Mold Treatment
Signs you need it
Visible black or green growth at register openings, musty odor that intensifies when the system runs, or recent water intrusion in the basement or mechanical room.
What it costs in Aurora
Spot mold treatment in Aurora runs $200-$350 for localized register or trunk-line areas; full-system treatment with fogging and protectant application ranges $400-$650.
How we do it
We HEPA-vacuum visible growth, apply EPA-registered fungicide with dwell time per label, fog the full duct system with Abatement Technologies equipment, and apply moisture-resistant coating at known intrusion points.
UV Light Installation
Signs you need it
Recurring mold or biofilm on coils or in drain pans despite cleaning, or family members with mold-sensitive respiratory conditions.
What it costs in Aurora
Single-lamp UV-C installation at the coil or air handler in Aurora runs $350-$550 including lamp and ballast; dual-lamp systems with remote monitoring capability run $650-$900.
How we do it
We mount the lamp assembly with sight-glass verification, wire to the blower interlock so it cycles only when air moves, and document lamp intensity and placement in the job record.
What Air Quality & Sanitizing Costs in Aurora
| Item | Typical range in Aurora |
|---|---|
| Spot mold treatment | $200-$350 |
| Full-system mold treatment with fogging | $400-$650 |
| UV-C lamp installation (single) | $350-$550 |
Does Aurora’s humidity mean mold will just come back after treatment?
Not if we address the moisture source; we identify and document intrusion points, apply moisture-resistant coating, and can install UV prevention where humidity remains chronically high. Call (331) 236-5490 for an inspection.
Is the sanitizing chemical safe for children and pets?
We use EPA-registered products with specified dwell and ventilate times; the home is safe to occupy once we complete the post-treatment flush and document residual levels.
Brands We Service in Aurora
We stock parts and service equipment from Honeywell, Aprilaire, and Guardsman, with Rotobrush and Nikro cleaning systems on every truck. Most common filter, UV lamp, and humidifier pad replacements are carried locally, so Aurora jobs rarely wait on parts. See our brands for the full equipment roster.
Pricing for Air Duct Cleaning in Aurora, IL
| Service | Typical range in Aurora |
|---|---|
| Full air duct cleaning (standard home) | $350-$650 |
| Dryer vent cleaning | $120-$220 |
| Evaporator coil cleaning | $180-$320 |
| Blower assembly cleaning | $150-$280 |
| Spot mold treatment | $200-$350 |
| Full-system mold treatment with fogging | $400-$650 |
| UV-C lamp installation (single) | $350-$550 |
| Duct repair & sealing (per system) | $250-$600 |
Price in Aurora pushes higher when we find collapsed flex-duct requiring access panel cuts, or when converted gravity systems need custom brush sizing for oversized trunk lines. Every price is written and agreed before work starts, Haven Standard Clause 1, with no per-vent add-ons or post-arrival upsells.
Neighborhoods We Serve in Aurora
We work across Aurora’s full span, from downtown’s late-Victorian blocks to the postwar subdivisions of East and West Aurora and the 1980s-90s developments near Orchard Road. Crews are dispatched from our Chicago office and typically arrive within scheduled windows across the city.
- East Aurora (original bungalow blocks, 1950s-60s conversions)
- Downtown Aurora (pre-1900 structures, mixed-use mechanical systems)
- West Aurora (1970s-80s tract homes, aging flex-duct)
- Orchard Road corridor (1990s-2000s construction, upgraded filtration)
- Fox River corridor (1920s-40s two-flats, converted heating systems)
Service Area - Cities Near Aurora
CleanRun serves homeowners throughout the western Chicago metro, with crews regularly scheduled in Naperville, IL, Lisle, IL, Bolingbrook, IL, and Downers Grove, IL. Dispatch and scheduling are coordinated from our Chicago office; all calls are answered by a live person.
Serving Aurora, IL - Our Local Coverage Area
We’re based in the Aurora area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Air Duct Cleaning in Aurora
Standard residential duct cleaning does not require a permit in Aurora; duct repair or modification that alters the building’s HVAC load calculation may require review. We document our scope in writing and flag any work that triggers permitting requirements before starting.
We typically schedule Aurora appointments within one to two business days, with flexibility for homeowners in the Fox River corridor or East Aurora bungalow blocks who need specific timing around work schedules. Call (331) 236-5490 for current availability.
Yes, we cover Aurora in full, from the downtown historic district through East Aurora, West Aurora, and the Orchard Road corridor, with the same written pricing and documented photo record on every job regardless of location.
What happens when you call
- 1A real person answersNo phone trees - talk to a local air duct cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Aurora Customers Say
"On time, professional, and explained what the readings meant without talking down to me."
- Warren E."Thorough job on the ducts and the dryer vent. Left the house clean and the paperwork was clear."
- Rafael I."My allergies genuinely improved. They also told me the ducts did not need sealing, which I had been quoted for elsewhere."
- Petra K.